| Message |
|---|
| Party | unnit Moscow 15:44 16/08/2014 Posts 1310 |
|
| zidana writes: unnit my lighter with a mechanism like the one that you understand. My gas is not. How to go to the gas. The above was a recommendation on how to reduce the supply of gas, but whether it is suitable for this lighter.
Welcome, if the gas is not regulated by the roller, it is necessary to disassemble the lighter. How to disassemble the site has, of the reasons likely gum stuck to. Remove the cover, then flint mechanism, unscrew the two screws and a gas burner, gas regulation plug to hook screwdriver. Unscrew the gas valve and see what and how, or gum, or do we change from the other valve. |
|
| Member | zidana Sarov Nizhny Novgorod region. 23:05 16/08/2014 Posts 10 |
|
|
| Member | zidana Sarov Nizhny Novgorod region. 17:50 20/08/2014 Posts 10 |
|
| unnit writes: Welcome, if the gas is not regulated by the roller, it is necessary to disassemble the lighter. How to disassemble the site has, of the reasons likely gum stuck to. Remove the cover, then flint mechanism, unscrew the two screws and a gas burner, gas regulation plug to hook screwdriver. Unscrew the gas valve and see what and how, or gum, or do we change from the other valve.
Disassembled lighter valve really prisoh. Lighter I separate it worked, but it became poison gas. Elastic on the valve must be flat or curved? I arched shape parts. that under the flap. And because of what you can make a new gum, as No other such valve. |
|
| Party | Yuzer_Zyu Moscow 18:10 20/08/2014 Posts 1628 |
|
| soak in pure gum (neetilirovanom) gasoline is gone, will be better. |
|
| Member | zidana Sarov Nizhny Novgorod region. 19:17 20/08/2014 Posts 10 |
|
| Yuzer_Zyu writes: soak in pure gum (neetilirovanom) gasoline is gone, will be better.
Gum removed from the valve or with the valve omitted? |
|
| Party | Yuzer_Zyu Moscow 19:26 20/08/2014 Posts 1628 |
|
| I soaked separately, but probably not the difference, brass is not rotten in petrol ... |
|
| Member | zidana Sarov Nizhny Novgorod region. 20:26 20/08/2014 Posts 10 |
|
| How to remove the rubber from the valve needle? |
|
| Member | zidana Sarov Nizhny Novgorod region. 20:29 20/08/2014 Posts 10 |
|
| And another question: wide tires, it can be turned over and insert the other end? |
|
| Party | Yuzer_Zyu Moscow 20:43 20/08/2014 Posts 1628 |
|
| if you talk about the cuff, I do not understand why there is a needle it is usually easy to remove, or rolls You can turn the course, why do you doubt? |
|
| Member | zidana Sarov Nizhny Novgorod region. 21:52 20/08/2014 Posts 10 |
|
| I'm talking about the exhaust valve. This metal cylinder and gum inside. I miss it. Lighters 30 years not used. |
|
| Party | Yuzer_Zyu Moscow 21:58 20/08/2014 Posts 1628 |
|
| Give photo pliz do not understand what kind of gum you |
|
| Member | zidana Sarov Nizhny Novgorod region. 22:48 20/08/2014 Posts 10 |
|
| 
I do not have a camera. He took a picture of this subject. Red arrow indicates the valve bottom in his band, which covers gas. She's poison. |
|
| Party | unnit Moscow 8:33 08/21/2014 Posts 1310 |
|
| zidana writes:
Disassembled lighter valve really prisoh. Lighter I separate it worked, but it became poison gas. Elastic on the valve must be flat or curved? I arched shape parts. that under the flap. And because of what you can make a new gum, as No other such valve.
I cut down such gum, find a thin tube in the size of gum, a little eroding edge of the ruble and oil-resistant rubber. If there is oil-resistant rubber and it can be of the ordinary. |
|
| Member | zidana Sarov Nizhny Novgorod region. 16:50 08/21/2014 Posts 10 |
|
| Rubber there any thickness. |
|
| Party | unnit Moscow 17:41 08/21/2014 Posts 1310 |
|
| zidana writes rubber there any thickness.
I use 1.5 mm., And can be thicker to take. |
|
| Member | zidana Sarov Nizhny Novgorod region. 17:48 08/21/2014 Posts 10 |
|
|
Entrance 
Registration 
