Forum | Lumet board

WARNING: Due to the sharp surge in the activity of spammers to November 15, 2011, any posts on the forum from unregistered users are prohibited. Please, to participate in a forum register on the site.
To leave a message, please login! Entrance Registration

Search Forums:








Lumet board

Tag not found
Message
Member

Vitali

12:48 05/23/2015

Posts 27

Hello! Acquired table Lumet, but nesrabatyvaet opening of the cover, I think spring is in a wheel come off. Can anyone have the correct circuit its location. Thanks in advance.


Party

unnit

Moscow

15:30 05/23/2015

Posts 1305

Message Edit 15:32 - 23/05/2015 User unnit


Vitali writes:

Hello! Acquired table Lumet, but nesrabatyvaet opening of the cover, I think spring is in a wheel come off. Can anyone have the correct circuit its location. Thanks in advance.



And exactly a spring jumped? usually just break off the tips.

Member

Vitali

15:52 05/23/2015

Posts 27

In the evening otfotkayu lay out, and we can otlamalsya.

Party

unnit

Moscow

18:17 05/23/2015

Posts 1305

Vitali writes evening otfotkayu lay out, and we can otlamalsya.


Photo well ... clear and understandable.

Member

Vitali

21:58 05/23/2015

Posts 27

Member

Vitali

21:59 05/23/2015

Posts 27

Here in this form it all and was once disassembled.

Party

unnit

Moscow

17:18 05/24/2015

Posts 1305

Well, spring is intact ... This is good, but the record is broken, the tip of her bent. Transform it is not difficult, but you can pick up and the other lighter.

Member

Vitali

17:52 05/24/2015

Posts 27

That bysh if to straighten the plate does not help. and how to know how it looks in the original, and how it should be assembled. Driving to think sposla.

Party

Yuzer_Zyu

Moscow

18:50 05/24/2015

Posts 1625

Message Edit 18:51 - 05/24/2015 User Yuzer_Zyu


I too similar Lumet repaired three years ago, and also helped Sasha - gave me a steel wire for springs ... but after a short time the cognitive dissonance caused by her izbavitsa tries, but remember kada repaired atske was pleased ... but on the circuit - any lighter ratchet Smara, they are similar to klatsat all understand. In this current spring planted more cunning, but to work the ratchet is not affected. Lumet is DDR-ovsky crap (Leipzig metalovaren Choate is), they have patents in social country finally it was not possible - I have not seen in any case


Member

Vitali

23:10 05/26/2015

Posts 27

Yuzer_Zyu writes:

and on the circuit - any lighter ratchet Smara, they are similar to klatsat all understand. In this current spring planted more cunning, but to work the ratchet is not affected.



Thanks for the help! And just remember that I Mylflam, 1,946 111 model pomoymu there and looked like a spring is.

Party

Yuzer_Zyu

Moscow

11:33 27/05/2015

Posts 1625

You are on the table Toko rubites?

Member

Vitali

13:53 27/05/2015

Posts 27

No, there is a pocket, but a pocket sometimes sold as well as the board is deposited me.

And the board up and realize vozmёsh vesh toil. But I prefer the current gasoline.

Although gas slips.

Party

Yuzer_Zyu

Moscow

19:45 27/05/2015

Posts 1625

Message Edit 19:47 - 27/05/2015 User Yuzer_Zyu


Entire couple Dunhill Sylph Steering, yellow and white, six-inch. Want tusanutsya what the cool pocket, nicho do not offer?

If you look, they are in the eighth issue of Flint, at the end of the material about Dunhill

http://yuzerzyu.jimdo.com/ number at the top right, where two Jubilee Cover

By the way you in Moscow?

Member

Vitali

20:29 27/05/2015

Posts 27

I'm in Rostov-on-Don, some of my lighters lying on Avito in the Rostov branch, there are several dozen evans Trig-A-Lite remaining the standard mechanism. So look at Avito if something like it if you need to discuss can otfotkat Evans.

Member

Vitali

21:33 27/05/2015

Posts 27

The question arose camera through the lens KKW dressed as a Soviet analogue Yesenin? Ato I unscrew something I can not, I'm afraid to screw.

Party

unnit

Moscow

22:21 27/05/2015

Posts 1305

Vitali says: I'm in Rostov-on-Don, some of my lighters lying on Avito in the Rostov branch, there are several dozen evans Trig-A-Lite remaining the standard mechanism. So look at Avito if something like it if you need to discuss can otfotkat Evans.


Vitaly, and to hammer Evans also yours?

Party

unnit

Moscow

22:23 27/05/2015

Posts 1305

Vitali writes:

The question arose camera through the lens KKW dressed as a Soviet analogue Yesenin? Ato I unscrew something I can not, I'm afraid to screw.


Yes, too, through the lens dressed.

Member

Vitali

22:35 27/05/2015

Posts 27


Vitaly, and to hammer Evans also yours?


No my only Avito but not all


Member

Vitali

22:37 27/05/2015

Posts 27


Yes, too, through the lens dressed.


Thank you, then thread soured, but nothing we unscrew her head :)

Party

unnit

Moscow

22:39 27/05/2015

Posts 1305

Vitali writes:



Thank you, then thread soured, but nothing we unscrew her head :)


If you do not go to get out, try to unscrew the wick and pour through some shit.

Tag not found


About the forum site VintageLighters.ru

Most Users Ever Online:

28


Online:

6 guests

Stats:

Groups: 2

Forums: 4

Threads: 426

Posts: 10299

Participants:

7709 participants

30 guests

1 administrator

0 moderators

Best authors:

kirasa - 1747

Yuzer_Zyu - 1625

unnit - 1305

Val1730 - 1252

sspas - 534

Hartman - 481

Administrators: kypexin (504 Posts)