Post |
---|
| Member | Val1730 Ukraine 22.04.2011 22:41 1252 posts |
|
|
| Member | sspas 22.04.2011 23:16 533 posts |
|
| I do not remember where, but something like that I've seen. |
|
| Member | Val1730 Ukraine 26.04.2011 22:03 1252 posts |
|
| sspas writes: I do not remember where, but something like that I've seen.
Valery, I do not think that these lighters were put on stream, believe me, all of the plastic sawn by hand, it does not die, most of all, as we have it was before, I saw something like that carved. |
|
| Member | ENTREGA 27.04.2011 14:12 396 posts |
|
|
| Member | Val1730 Ukraine 21.05.2011 21:10 1252 posts |
|
| ENTREGA writes:
And that in chrome, lower, lighter what it is worth? |
|
| Member | Val1730 Ukraine 21.05.2011 21:15 1252 posts |
|
|
| Member | ENTREGA 23.05.2011 15:02 396 posts |
|
| val1730 writes: ENTREGA writes:
And that in chrome, lower, lighter what it is worth?
In chrome worth GAS SSSRovskaya lighter. Difficult to define a model, similar to the products the Baltic states. With quality !. On the shelf for 3-4 years and still harbor lights. Gun itself is decorated with this shtihelnoy engraving. In brown gun (type TT) mechanism lighters completely homemade |
|
| Member | Val1730 Ukraine 23.05.2011 15:12 1252 posts |
|
| Sorry for the small picture, you can not say so in the best view :) |
|
| Member | Val1730 Ukraine 03.11.2011 11:04 1252 posts |
|
|
| Member | Val1730 Ukraine 07.11.2011 22:33 1252 posts |
|
|
| Member | sspas 08.11.2011 00:27 533 posts |
|
| I give 97%, which is homemade. Offhand I can not even remember whether seen in factory lighters use of two different metals, in addition to decorative finishes. And there are different metals at the sites, and even in threaded connections. |
|
| Member | Val1730 Ukraine 08.11.2011 11:07 1252 posts |
|
| Message Edit 11:21 - 08.11.2011 user val1730
I also think that home-made, just all machined symmetrically, as it is all very well podognano.U I suspect that made her body from under the balloon with co2, those that were used in siphons to the article do not know in what year was invented such cylinders? |
|
| Member | ENTREGA 08.11.2011 11:50 396 posts |
|
| Matches, kirosin, salt ... all .. it was deficient. In the first half HHveka handicrafts made in lighters was widespread and gave additional profit. This beautiful bright representative of the skilled artisan hands. Ie 100% home-made. Such a model (twist the tube holder with a wheel) was "fashionable" in 30-40godah ... .. then went to the sleeve 50s (gang Sanitas. Odessa gang Engels. Odessa t, etc.) And about the complexity of threaded connections ... and not to show off)))) here for example |
|
| Member | metsavend 13.11.2011 12:25 Posts 82 |
|
| Also think that home-made. Here, for example cap covering the wick is "lamb" from the tonometer (instrument for determining blood pressure) ... 8 h1.0mm |
|
| Member | Val1730 Ukraine 20.11.2011 14:43 1252 posts |
|
| metsavend wrote: Also I think that home-made. Here, for example cap covering the wick is "lamb" from the tonometer (instrument for determining blood pressure) ... 8 h1.0mm
Cap is not 100% of it, I bought it with. There must be such a plan, I think so :) |
|
| Member | Val1730 Ukraine 04.06.2012 14:43 1252 posts |
|
|
| Member | unnit Mytishi 05.06.2012 10:21 1166 posts |
|
| Val1730 writes: Such is the key
Valery, homemade products are fond ??? |
|
| Member | Val1730 Ukraine 05.06.2012 10:38 1252 posts |
|
| unnit writes:
Valery, homemade products are fond ???
Not really, unless I buy the normal price :) This key example bought for $ 9 |
|
| Member | unnit Mytishi 05.06.2012 10:42 1166 posts |
|
| $ 9 - we can say that for this :)) |
|
| Member | Vladd Germany 15.07.2012 18:12 315 posts |
|
|